Pin Code Activation; Timers; Individual Call Timer; Resettable Call Timer - Motorola 4500 Manual

Features

PIN Code Activation

Activate PIN Code
1. Press F, 1 .
2. Scroll the menu by pressing H or G until
PIN INACTIV displays.
3. Press s once to toggle this feature on,
and C to toggle it off.
4. To exit the Feature Menu, press E.
Store PIN Code in Memory Location 07
1. Enter PIN code.
2. Press s.
3. Press 0, 7.
Place a Call With PIN Code Active
1. Enter number to be called, or recall from
memory.
2. Press S. Wait for double tone –"beep, beep."
3. Press S. The phone will automatically
send the PIN code stored in memory
location 07.
Your cellular carrier may require a personal
identification number (PIN) when placing outbound
calls. This code assures the cellular system that
the person placing the call is an authorized user.
Ask your cellular service provider if this is required
in your system. Only select this feature if your
cellular service provider requires it.
This feature will allow you to automatically send
your PIN code with all outbound calls. If Invalid
PIN displays, check to see if you have activated
the feature in the menu without storing a PIN
46
number in memory location 7. The PIN code must
be less than seven digits.
If you enter a service area which does not require a
PIN code, disable the feature in the feature menu.

Timers

Call timers provide a useful means of monitoring
the air-time spent in conversation. Several of
these operate in the background and can be
displayed at any time. Another offers beep tones
heard only on your side of the conversation.
Each timer begins counting as a cellular channel
is assigned, or when the phone rings to signal an
incoming call. If an incoming call is not answered,
the timers revert to their previous values.

Individual Call Timer

To Display the Time of Your Last Call
Press R, #, #.
This timer accumulates the air-time of a call in
minutes and seconds.
It automatically resets before a new call is placed
and when the phone is turned off.

Resettable Call Timer

To Display
Press R, #, #, #.
To Reset
Press F, 0, 7, C.
Features
47