Edit A Memory Location - Motorola 4500 Manual

Memory
Instruction and
Key Sequence
1 Enter the phone number of the
2 3 4 5
bank — 1,
, , ,
6 7
, or recall it from memory
R
location xx — , x, x
2 Create a pause —
F S s
, ,
3
Enter the ID number and a pound
8 8 8 #
sign — , ,
or recall it from memory location
F R
xx — , , x, x
4 Create another pause —
F S s
, ,
5 Enter the account number and a
2 2 #
pound sign — , ,
s
To store number, press
6
and the Memory Location or One
s
Touch Key. Press again to
bypass Alpha display. The
memory location number will be
displayed to confirm storage. If you
stored the number in a One Touch
Dial location, STORED will be
displayed to confirm storage.
To place a linked call, press S to transmit the
first group of numbers, prior to the first pause. (If
your number is stored in a One-Touch Dialing Key
or a Turbo Dial location, simply press the key.) After
waiting for the system response, press R , S to
36
Display
,
1234567
234567ø
67ø888C
7ø888Cø
88Cø22C
ALPHA
–
send the second group of numbers. Continue to
press R, S until all digit groups are sent.
If the PIN code feature is activated the PIN code
will automatically be sent after the first pause by
pressing S.
NOTE Do not add the PIN code to the linked
sequence. Your phone will automatically insert the
PIN code when placing a linked call. Follow the
instructions in "PIN Code Activation" on page 46.

Edit a Memory Location

1. Press R and the two-digit location
number.
2. Press R again, if name only displays, so
that the phone number to be changed is
displayed.
3. Edit phone number by pressing C to back
out the digits to be changed. Enter new
digits.
4. Press s and the same two-digit location
number.
The display will flash ALPHA and then the name
you have stored or – if no name is stored.
5. Change or add alpha name tag if desired. To
edit name, press C to back out the letters
to be changed. Enter new alpha characters.
(Enter alphabetic characters as described
on page 28.)
6. Press s .
Memory
37