Storing A Pin Code With A Phone Number - Motorola E1000 Manual

Storing a PIN Code With a Phone Number

You can store a PIN code with the phone number for calls that
require additional digits (for example, to make a calling card call, or
to retrieve voicemail or answering machine messages). Insert one
or more of the following characters in the dialling sequence to
ensure that the number dials and connects properly:
Press
M >
Insert Pause
M >
Insert Wait
M >
Insert 'n'
You can store a maximum of 32 digits for a contacts entry stored on
the handset. The maximum number may vary for entries stored on
the USIM card. Each character counts as one digit.
You cannot store a number that contains a
USIM card.
To
insert a (pause) character
p
Your handset dials the preceding digits,
waits for the call to connect, then dials the
remaining digit(s).
Note: If your handset does not recognise
the first pause character, try 2 (
insert a (wait) character
w
Your handset dials the preceding digits,
waits for the call to connect, then prompts
you for confirmation before it dials the
remaining digit(s).
insert an (number) character
n
Your handset prompts you for a number
before dialling the call. The number you
enter is inserted into the dialling sequence
in place of the n character.
pp
or character on the
w n
Setting Up Your Contacts - 105
).