Table of Contents
Advertisement
Memory
8. You will see a Memory Protect message;
press s to overwrite.
Memory location number will display as
confirmation.
NOTE See "Number Preference" on page 41 for
more details on step 2.
Clear Memory Entries
1. Press C, s, and the two-digit location
number to be cleared.
2. The phone will display ALPHA –. Press s to
bypass.
The phone will display Full, flash number in
memory, followed by Change?.
3. Press s to clear.
or
Press E to exit without deleting the entry.
38
Additional features that may be available with your
phone but are not accessed through the feature
menu, are also described in this section.
Select/Cancel Menu Features
1. Press F, 1 .
2. Scroll the menu by pressing H or G until
the desired feature displays.
3. Press s to toggle the feature on, and C
to toggle it off.
4. Press E to exit the Feature Menu.
EXAMPLE To activate silent keypad, press F ,
1 , and scroll with # or G until the display shows
KEYPAD TONE ON. Press s to activate this feature.
The display will then show KEYPAD TONEOFF.
Press E to exit the menu.
Signal Strength Meter (SSM)
To Disable the SSM from Displaying
1. Press F, 1 .
2. Scroll the menu by pressing H or G until
SIGNAL MTR ON displays.
3. Press C once to disable the SSM and s
to reactivate.
4. Press E to exit the Feature Menu.
Once the SSM is disabled, on will appear in place
of the
s – – = = ≠ ≠
See "Signal Strength Meter" on page 22 for more
details.
Features
39
Hide quick links:
Advertisement
Table of Contents
