Change Service Level; Master Reset - Motorola 4500 Manual

Features
ignition being turned off. Calls may be placed while
in the Auxiliary Alert mode unless the unit has also
been locked subsequent to pressing F, 4. The
Auxiliary Alert mode is automatically disabled the
next time the ignition is turned from off to on. The
Auxiliary Alert mode can also be disabled by
pressing P or by pressing F, 4 again.
ALERT will turn off when the feature is disabled.

Change Service Level

1. Press F, 0.
2. Enter your six-digit security code.
3. Enter the number of the service level you
wish to use.
4. Press s.
The phone will display Level and the number
selected.
Your telephone can be set to restrict call
placement (as when lending the phone to another
person). Using the six-digit security code, you may
select one of the levels of restriction shown on the
page 53.
52
Restrictions
No restrictions (Standard setting)
• Full keypad and directory dialing
• No storage in directory locations
1-10 or One Touch Dial locations
• Keypad dialing only
• No directory or Turbo Dial access
Phone will place calls from all directory
R 0 1 9 9
locations ( , -
No keypad dialing. No directory change or
storage.
Seven-digit (local) dialing only,
including directory and message calls
(if seven digits or less)
Phone will place calls only from directory
R 0 1 - 1
locations 1-10 ( ,
If locations 1-10 are cleared, no outgoing
calls can be made. No keypad dialing. No
directory or One Touch Dial storage.
To change the phone to unrestricted operation, use
the procedure above and enter service level 4.

Master Reset

CAUTION Once begun, this procedure cannot be
canceled or reversed.
1. Press F, 0.
2. Enter your six-digit security code twice.
3. Press 1 , s.
Features
Level
4
6
3
2
S
, ).
5
1
0 S
, ).
53