Time And Date; Setting The Time And Date; Selecting The Incoming Message Alert - Motorola LS350 User Manual

Setting up Your Pager
This section gives instructions for setting the time and date. Access to this
feature is obtained through the Setup Pager menu.

Setting the Time and Date

From the Standby screen, press
m 86 f hjlb e
SET UP PAGER Press and release
is displayed.
Press
m 81 f hjlb e
TIME/DATE TIME/DATE
Press
m 85 f hjlbe
FORMAT! AM/PM FORMAT!AM/PM
displayed.
After the time has been set, the screen
m 85 f hjlbe
used to set the date is displayed.
DATE! 07/01
Press and release
m 85 f hjlbe
month is displayed, then press
DATE! 07/05
Press and release
is displayed, the press
SET
m 85 f hjlbe
SET
t
twice.
r
until SET UP PAGER
s
.
is displayed.
s
.
FORMAT!24HR
or is
r
until the correct
s
.
r
until the correct day
s
.
is displayed momentarily.
m 85 f hjlbe
TIME! 12!00A
m 85 f hjlbe
TIME! 03!00A
m 85 f hjlbe
TIME! 03!30P
8
7

Selecting the Incoming Message Alert

You can set your pager's incoming message alert to a silent vibration or
you can select one of the musical alerts.
m 82 f ojlbe
SELECT ALERT
m 82 f ojlbe
ALERT VIBE
10
9
r
Press and release until your choice of
FORMAT!AM/PM (for AM/PM time), or
FORMAT!24HR (for 24-hour time) is
s
displayed, then press .
The screen used to set the time is
displayed with the hour digit flashing.
r
Press until the correct hour is
s
displayed, then press .
Repeat Step 6 to set the minutes and AM/
PM fields (if AM/PM time was selected
above).
t
From the Standby screen, press twice.
r
Press and release until SELECT ALERT
s
displayed, then press .
The current alert setting is displayed.
is