Slide the battery door in the direction of the arrow to unlatch the battery
door.
Lift the battery door up to open.
Remove the old battery, noting the polarity.
Position the new battery so the + and - markings on the battery match
the polarity diagram next to the battery compartment.
Close the battery door.
Slide the door until it is fully closed.
Note: Check your pager's clock time after replacing the battery.
Sending a Test Page to Yourself
After you have read this guide and your pager has been activated by your
service provider, send yourself a test page. Refer to "Functionality and Use
of Your Pager" on page 33.
Turning Your Pager On
Press
m
88
f hjlb e
displayed and your pager activates the
MOTOROLA
power on chime (when in audible mode).
Press any button to stop the alert.
The unread message (home) screen is
m
88
f hjlb e
displayed.
NEW! 1
When your pager is on and no activity
m
88
f hjlb e
is taking place, the Standby screen is
3!30P 07/05
displayed. The Standby screen
displays the time and date and may
display other status indicators.
3
r
. The start-up screens are
5
Control Buttons
Read
Button
Select
Button
t
Menu
Used to access pager menus and to turn on the
backlight.
r
Read
Used to turn the pager on, read messages, and
navigate through menus.
s
Select
Used to select pager settings and features. Also used
to read additional screens of messages.
4
Turning Your Pager Off
From the Standby screen, press
m
85
f hjlb e
PAGER OFF
Press and release
displayed, then press
OFF
m
85
f ojlb e
the pager shuts off, and
OFF
from the display.
The off screen displays the time and
m
88
f ojlb e
date, and if the alarm is set, the alarm
3!30P 07/05
indicator.
Backlight
In low-light conditions, press and hold
pager's backlight. The backlight turns off automatically after the pager
returns to the Standby screen.
6
Menu
Button
t
twice.
r
PAGER OFF
until
is
s
.
is displayed momentarily before
m
is removed
t
for 2 seconds to turn on the