Sending A Test Page To Yourself; Setting The Time - Motorola digitz User Manual

When the message is longer than 12
R L
v555-1212vvv
characters, the remainder of the
D
B
message is displayed on one or
Message screen with
more additional screen(s) (indicated
continuous message
by
indicator
Press
Note: The next screen is
automatically displayed after 12
seconds, even if
The last screen shows the message
R L
v1881:45p8vv
slot number (
D
B
the time at which this message was
Last Message screen
received (
with message slot number
and message time stamp

Setting the Time

R L
vvv12:00a88v
D
B
Standby screen
R L
vsetTvtTime8
D
B
Set Time prompt
R L
vvv12:00a888
D
B
Set Time screen
in the example).
B
S
to view the next screen.
S
is not pressed.
1 in this example) and
1:45p in this example).
From the Standby screen, press and
V
release until setT tTime is
displayed.
S
Press .
The hour field flashes.
V
Press and release to adjust the
hour. (In this example, 12 is
changing to 1 .)
S
Press to move to the first minute
digit.
R
v8escape8?vv
D
Escape prompt
Note: If any message has not been read, your pager emits a reminder
chirp every two minutes for 30 minutes, or until all of the messages are
read. A message is considered to have been read if any part of the
message is displayed.

Sending a Test Page to Yourself

After you have read this guide and your pager has been activated by your
service provider, send yourself a test page. If you have any problems, refer
to "Functionality and Use of Your Pager" on page 25.
8
7
R
vvv81:00a8vv
D
The hour has been adjusted.
R
vvvv1:30a8vv
D
The first minute digit has
been adjusted.
10
9
You can continue to scroll through all of
your messages by pressing
Whenever you want to return to the
Standby screen, press and release
until escape ? is displayed.
S
Press to return to the Standby
L
screen.
B
V
Press and release to adjust the
L
first minute digit. (In this example,
B
is changing to 3 .)
S
Press to move to the second
minute digit.
V
Press and release to adjust the
L
second minute digit. (In this
B
0
example, is changing to
S
Press to move to the AM/PM
character.
S
.
V
0
5
.)