Presetting Radio Stations Manually; Receiving Preset Stations - Kenwood KRF-V5090D Instruction Manual

Listening to radio broadcasts

Presetting radio stations manually

The RDS auto memory function assigns preset numbers to RDS stations
starting from preset number "1". Therefore, be sure to execute the RDS
auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations.
See "Presetting RDS stations (RDS AUTO MEMORY)".
MEMORY
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys
to select one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the previous station
will be replaced by the new one.
22 EN
MULTI CONTROL
Blinks for 20 seconds

Receiving preset stations

Numeric keys
¢
1
Press the TUNER key to select tuner as the source.
2
Enter the number of the preset station you want to receive (up
to "40").
Press the Numeric keys in the following order:
For "15", press ................................ 0, 5
For "20", press ................................ 0, 0, )
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
TUNER