Ustenlngtoradlobroadcasts; Tuning Radio Stations.17; Presetting Radio Stations Manually.17; Receiving Preset Stations.17 - Kenwood VR Series Instruction Manual

VR/KRF-V SERIES {En/KM)
Tuning radio stations
AUTO
Presetting radio stations manuaiiy
MEMORY
D
Tune to the station fou want to store.
El
Press the MEMORY key while receiving the station.
D
Use the input selector to select the tuner.
' 'AM' or 'FM' indicator
Q
Use the BAND key to select the desired broadcast band.
Each praas switchea tha band
aa followa:
r QFM
I— QAM
irn®
I. JU" '
El
Use the AUTO key to select the desired tuning method.
Each praaa awitchaa tha tuning mathod aa followa:
• Normally, set to 'AUTO' (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
□
Use the MULTI CONTROL (TUNING/SKIP) to select the
station.
Frequency Lights when a broadcast is
display being received in stereo.
DO nn-
—
0 J.uu —
'TUNED' is displayed
when a station is received
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the
desiredstation.
• You can also use the TUNING key on the remote control (RC-R0711)
to make the selection.
B
Use the MUL Tl CONTROL to select one of the station
presets (1 -40).
Q
Press the MEMORY key to accept the setting.
• Repeat steps D, B, B and B to store as many statioris as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Receiving preset stations
_
Q
Use the remote control to select the tuner as the source.
• The remote control switches to the tuner operating mode.
B
Pulor the number of the preset you want to receive (up to
"40").
Praaa tha numeric kaya In tha following order:
For "15**, praaa.l-flOI.rs]
For "20", praaa.Iflol.MOhfol
• If you make a mistake entering a two digit number, press the +10
key several times to return to the original display and start again.