Kenwood KRF-V5090D Instruction Manual page 34

In case of difficulty
Remote control unit
Symptom
Remote control operation is not possible.
34
EN
Cause
• The remote control is set to the DVD player
operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between this
model and the remote.
• The remote control has not been changed to
the operation mode for the KENWOOD DVD
player you wish to control.
Remedy
• Press any of the Input Selector keys to select
the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
controllable range.
• Press CD/DVD key or DVD/6CH key to
activate the operation mode for the component
you want to control before operation. ⁄