Setting The Track Mark Intervals - Kenwood K-501USB Instruction Manual

Recording Setup (continued)
Setting the track mark intervals (AUTO MARK)
When you record from a radio and selected to mark track marks automatically, you can also set the intervals at which the track marks are put.
Select the AUTO track mark setting in advance. (See page 59.)
* Press the SETUP key to select [REC SETUP] in advance. (See page 56.)
1
Select [AUTO MARK], and then enter the selection.
2
Set the interval.
Select to mark track
marks at 5-minute
intervals.
3
Enter the selection.
The same operation is also available on the main unit.
A track mark is usually marked when no-sound condition has continued for 2 seconds or more
Hint
according to the setup, but there may be cases in which such a track mark is not marked due to noise
from the audio source, etc.
60
English
5 min. 10 min.
Select to mark track
marks at 10-minute
intervals.
* S e l e c t i n g [ R E T U R N ]
returns to the previous
display.
OFF
Select to mark a track
mark every time no-
sound condition
has continued for 2
seconds or more.