Table of Contents
Advertisement
Enhancing both bass and treble (TONE)
To adjust the enhancement level
Select Treble or
Bass
and adjust.
Setting a desired tone (MANUAL EQ)
The system incorporates a high-grade, 7-band equalizer covering heavy bass to ultrahigh
treble frequencies. You can create desired tone response curves and preset up to three
of them (USER 1 to 3) in the user memory.
OFF
MANUAL EQ OFF
Defeating the D-BASS, TONE and MANUAL EQ setups temporarily (FLAT)
The previous display resumes in 5 seconds after a tone setup is switched ON/OFF or in 20
seconds after an enhancement level is adjusted.
Hint
The operations including the selection can also be performed on the main unit.
Each press switches between ON and OFF.
*
The level can be
a d j u s t e d i n t h e
range between +8
and -8, in steps of 2.
* It can also be adjusted in SOUND SETUP. (See page 63.)
Each press switches the selection.
*
lights up when it is ON. When
the level is "0", it doesn't light.
USER 1
USER 2
USER 1 setup
USER 2 setup
* It is necessary to preset USER 1 to 3 in advance.
(See page 64.)
Each press switches between FLAT and the set tone
setup.
* When FLAT is switched ON, the lighted indicators among
,
and
lights up when it is ON.
When the level is "0", it doesn't
light.
The level can be
a d j u s t e d i n t h e
range between +8
and -8, in steps of 2.
USER 3
USER 3 setup
are extinguished.
19
Advertisement
Table of Contents
