Setup Setting The Recording Speed; Setting The Recording Input - Kenwood K-501USB Instruction Manual

Setting the recording speed (O.T.E. SPEED)
Set the speed of recording in the USB audio player or memory card.
1
Select [O.T.E. SPEED] and enter the selection.
2
Select the recording speed and enter the selection.
The same operation is also available on the main unit.
Audio is not output during HIGH speed recording.
Hint
When [HIGH] is selected while the recording input is set to ANALOG, the recording input is switched
automatically to DIGITAL. (see below)
When a memory card with insufficient transfer speed is used, HIGH speed recording may not be
possible. In this case, select the [NORMAL].
Setting the recording input (REC INPUT)
Set whether the digital or analog input is used for recording in the USB audio player or memory card.
1
Select [REC INPUT] and enter the selection.
2
Select the recording input and enter the selection.
The same operation is also available on the main unit.
The ANALOG recording input setting is canceled when the system is switched OFF. (The default recording input is DIGITAL.)
Hint
When [ANALOG] is selected while the recording speed is set to HIGH, the recording speed is switched
automatically to NORMAL. (see above)
*
* S e l e c t i n g [ R E T U R N ]
returns to the previous
display.
or
*
* Selecting [RETURN] returns to the
previous display.
or
blinks.
* Selecting [HIGH]
multiplies the
recording speed
by 4 times.
and blinks.
* Even when the recording
input is set to DIGITAL, the
analog signal is recorded
when the recording source
is an analog component.
57