Setting The Recording Level - Kenwood K-501USB Instruction Manual

Recording Setup (continued)
Setting the recording level (REC LEVEL)
If the audio recorded in the memory card, component connected to the D.AUDIO output or the USB audio
player is distorted or too low, adjust the recording level.
* Press the SETUP key to select [REC SETUP] in advance. (See page 56.)
1
Select [REC LEVEL] and enter the selection.
2
Select the recording source and enter the selection.
3
Adjust the recording level.
4
Enter the selection.
The same operation is also available on the main unit.
Hint
58
English
E x a m p l e ) W h e n
[ M E M O RY / U S B ] i s
selected
E x a m p l e ) W h e n
[D.AUDIO] is selected
* S e l e c t i n g [ R E T U R N ]
returns to the previous
display.
* S e l e c t i n g [ R E T U R N ]
returns to the previous
display.
MEMORY/USB level
Adjust in the range between –2 and +2.
D.AUDIO level
Select HIGH or LOW.