Kenwood HD-5MD Instruction Manual page 43

A single track of a CD can be recorded by one-touch recording (normal speed, 4x
speed) (Single track O.T.E.)
1 Set a recordable minidisc. ¤
2 Play a desired track. )
3 Press the "O.T.E." key on the remote con-
trol unit.
4 After completion of recording, press the 0
key to eject the minidisc.
(Main unit)
In case of CD-R/RW, depending on the disc recording condition and the characteristics, sound skip-
ping or inclusion of noise may occur on rare occasions with recording to MD at 4x speed (CD > MD
HIGH), and normal recording may not be possible.
In such a case, we recommend recording at normal speed (CD > MD NORM).
O.T.E.
÷ When you want to record a track during playback
of a CD, return to the start of that track will be
made and playback and recording will be started
just by pressing the O.T.E. key during playback.
÷ Recording will be done with the recording mode
and the recording speed set in advance.
Perform the operation of step 3 on page 33 to
change the recording speed.
÷ At the end of the recording, the CD will enter
pause status.
÷ In the same way, other desired tracks can be re-
corded.
÷ When the possible recording time or the possible
number of tracks on the MD is exceeded, "DISC
FULL" will be displayed and the recording will
stop.
÷ Eject the minidisc after completion of the re-
cording.
Always eject the minidisc after completion of
the recording.
43
HD-5MD/EN