Kenwood HD-5MD Instruction Manual page 37

To add a track to an existing program
Remote control unit only
Press in stop mode
2 (At the time of CD program)
Pres the DISC SKIP keys to se-
lect the disc.
1 Select the track number to be
added with the numeric keys.
2 Press the "SET" key.
To clear a programed track
Remote control unit only
Press in stop mode
CLEAR
/DELETE
÷ Each time the key is pressed, the last track
in the program is cleared.
Changing to the next track during play-
back of a track
Main unit
÷ When the ¢ key is pressed during play-
back, play will skip to the next track in the
program.
÷ When the 4 key is pressed once during
playback, the track being played will be
played from the beginning.
1 2 3
ABC DEF
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
&( )-
+100 0 +10
',:
SET
Remote control
4 ¢
P.CALL
Various CD /MD playback features
÷ Up to 32 tracks can be programed. When "PGM
FULL" is displayed, no more tracks can be pro-
gramed.
÷ If you made a mistake, press the CLEAR key and
enter the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
To clear the entire program
Remote control unit only
Press in stop mode
P.MODE
/RDS DISP.
Confirmation of the contents of the pro-
grammed tracks
Press the 4, ¢ keys after completion of
programming.
Press in stop mode
Main unit
÷ Each time a key is pressed, the programmed
tracks will be displayed sequentially.
HD-5MD/EN
Remote control
4 ¢
P.CALL
37