Operation Of Remote Control Unit - Kenwood HD-5MD Instruction Manual

@ PREV.-GROUP- NEXT key
Used for MD group editing.
# RANDOM/PTY key (For Europe and U.K.)
CD, MD : Press for setting playback of tracks
in a random order.
TUNER : Used at the time of PTY reception.
RANDOM key (For other countries)
Press for setting playback of tracks in a ran-
dom order.
P.MODE/RDS DISP. key (For Europe and U.K.)
CD, MD : Press to program tracks in the de
sired sequence.

Operation of remote control unit

Loading batteries
1 Remove the cover.
Operation
After plugging the power cord of this unit,
press the POWER ( ) key of the remote con-
trol unit to turn the system ON. When the sys-
tem is turned ON, press the key of the function
to be operated.
÷ When pressing more than one remote control
keys successively, press the keys securely by
leaving an interval of 1 second or more between
keys.
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
÷ If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Q
P.MODE key (For other countries)
·
@ SOUND key
Press to switch the sound effect.
•
MUTE key
·
Press to mute the audio temporarily.
# VOLUME keys
Press to adjust the volume.
fl
2 Insert batteries.
÷ Insert two R6 ("AA"-size) batteries
following the polarity indications.
Operating range (approx.)
6m
Controls and indicators
TUNER : Used at the time of RDS reception.
Press to program tracks in the desired se-
quence.
3 Close the cover.
¡
15
HD-5MD/EN
ª
fl
&
&
^
Remote sensor