Remote Control Function - Kenwood VZ-7000N Instruction Manual

Remote Control Function

38 button
FM+ button
VOLUME buttons
ATT button
V.SEL button
OPEN button
AME button
3 Basic Source Control Function
• SRC button
Each time you press the SRC button, the source mode
switches.
NOTE
• The mode switches to the next mode from any mode
which cannot be used.
• The tuner mode, CD mode, tape mode and disc
changer mode will differ depending on the unit that is
connected.
3 Visual Function
• V.SEL button
Each time you press V.SEL button, the image video
will switch between the navigation, television and
video.
• MODE button
Each time you press MODE button, the screen mode
switches between the full, zoom, just, cinema and
normal.
3
TV Control Function
(Operation available when the TV audio source is
selected.)
• 38 button
Each time you press the 38 button, the tuning mode
switches to auto 1, to auto 2 and manual.
• TUNE buttons
Press the 4 button to make decreasing seeks.
Press the ¢ button to make increasing seeks.
SRC
SRC button
TV/DVD
4 button
FM
TUNE
DISC
TRACK
¢ button
AM
M/S
AV OUT button
ATT
V.SEL AV OUT FNC
FNC button
OPEN MODE SP
SP button
AME
MODE button
REMOTE CONTROL UNIT
RC-402
• VOLUME buttons
Press the
Press the
• ATT button
Turn down the volume quickly. To return the volume
to its original level, press the button again.
• SP button
Switch to the built-in speaker mode.
• OPEN button
Open/Close the monitor.
NOTE
The "
• FNC button
Press the FNC button to switch the source control
screen.
Each time you press FNC button, the back picture in
the source control screen changes.
• AV OUT button
Each time you press AV OUT button, the AV output
mode switches between the normal, television and
video.
• FM+ button
Switch between the TV1, TV2 and video.
• AME button
1
Selects the band for auto memory entry.
2
Press the AME button.
3 Press the ¢ button or 4 button to start auto
memory entry.
ª
button to increase the volume.
·
button to decrease the volume.
" button cannot be used.
23