Adjusting The Touch Position - Kenwood VZ-7000N Instruction Manual

System Set Up Function
Touch Panel Adjustment Screen
T O U C H
P l e a s e
t h e C e
t h e B u
R i g h t - T o p
C A N C E L

Adjusting the Touch Position

The touch panel can be adjusted if the position
touched and the operation performed do not
match.
1
Accurately touch the mark at the upper right.
2
Accurately touch the mark at the lower left.
When the mark at the lower left is touched, the
adjustment is completed and the system setup
menu screen reappears.
NOTE
• If [ CANCEL ] is touched without touching the button
at the upper right, the adjustment is canceled and
the screen that was set before switching to the
system setup menu reappears.
• If [ CANCEL ] is touched after touching the button at
the upper right, the button at the upper right
reappears.
• If [ RESET ] is touched, the settings are reset to the
factory defaults and the setup menu screen
reappears.
12
P A N E L A D J U S T
T o u c h
t e r o f
n
t t o n i n t h e
C o r n e r .
R E S E T