Switching Display Type; Display Switching Part For "Display Type; A" And "Display Type B; C" And "Display Type D - Kenwood KDC-Z939 Instruction Manual

3
Select the Setting mode
Press the [FM] or [AM] button.
Each time the button is pressed it switches between Speaker
setting mode and Woofer setting mode.
4
Select the Speaker and Woofer type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
In Speaker setting mode
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
In Woofer setting mode
Woofer type
OFF
12 in. A type
10 in. A type
12 in. B type
10 in. B type
12 in. C type
10 in. C type
8 in. type
12 in. D type
10 in. D type
5
Exit Speaker & Woofer Setting mode
Press the [Q] button.
Display
"OFF"
"5/4 inch"
"6 9/6inch"
*
"O.E.M."
Display
"Woofer OFF"
"12in type A"
"10in type A"
"12in type B"
"10in type B"
"12in type C"
"10in type C"
"8inch"
"12in type D"
"10in type D"
— 11 —

Switching Display Type

Setting the Display type.
Press the [DISP] button.
Each time the button is pressed the Display type switches as
shown below.
Display Display mode
"Display Type D"
"Display Type A"
"Display Type B"
"Display Type C"
The display of each part can be changed.
- Picture:
<Display switching part for "Display Type C" and "Display Type
D"> (page 14)
- Character information display:
<Display switching part for "Display Type A" and "Display Type
B">: (page 12)
<Display switching part for "Display Type C" and "Display Type
D">(page 14)
Picture
Character
information display
Character
information display
Source type icon
Picture
Character
information display