Receiving A Call; Call Waiting; During A Call; Other Functions - Kenwood KCA-BT200 Instruction Manual

Receiving a call

Answering a Phone Call
Press the Control knob or one of [1] – [6] buttons.
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [SRC] button.

Call waiting

Answering Another Incoming Call with the
Current Call Suspended
1. Press the Control knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Press the Control knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the Control knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Press the Control knob for at least 1 second.
Answering the Waiting Call after Terminating the
Current Call
Press the [ATT] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the Control knob.

During a call

Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode (
Press the [38] button.
Switches between Private talk ("PV TALK") or Hands-
free talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Turn the Control knob.

Other functions

Clearing the Disconnection Message
Press the [ATT] button for at least 1 second.
Switching between Display Modes
Press the [SE] button. You can switch between the
Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
2. Select the button you wish to register
3. Exit the dialing method selection mode
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display
"DVC REG"*
"SDVC SEL"*
"PHN-SEL"*
"AUD-SEL"*
"SMS DL"*
"IN BOX"*
"VOICE TAG"* Register the voice tag for "voice recognize". Refer to page 15.
"V-RECOG"*
"DVC-DEL"*
"D-STATUS"
"PIN EDIT"*
"ANS"
)
"SPK"
"C-BP"
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
Press the [1] – [6] button for at least 2 seconds.
Press the [ATT] button for at least 1 second.
Setting overview
Register a Bluetooth device (pairing). Refer to page 12.
Allow registration of a special device that cannot be
registered normally. Refer to page 12.
Select a cell-phone subject to hands-free connection. Refer
to page 14.
Select the audio player to be connected. Refer to page 14.
Download a short message. Refer to page 16.
Display the received short message. Refer to page 16.
Make a voice dialing call. Refer to page 8.
Cancel registration of the Bluetooth device. Refer to page 14.
"HF-CON"/ "AD-CON"/ "BAT"/ "SGNL": Display the status of
the Bluetooth device. Refer to page 22.
Specify the PIN code required when registering this unit
using the Bluetooth device. Refer to page 12.
"OFF"/ "0" – "99": Answer a call automatically after lapse
of the preset time interval for automatic answer. Refer to
page 22.
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker. Refer
to page 22.
"ON"/ "OFF": Output a beep from the speaker when a call
comes in. Refer to page 22.
9
|
English