Receiving A Call; During A Call; Other Functions - Kenwood KCA-BT200 Instruction Manual

Receiving a call

Answering a Phone Call
Model-D-1, 2, 3:
Press the [AUDIO] button or one of [1] – [6] buttons.
Model-D-4:
Press the [VOL] button or one of [1] – [6] buttons.
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Press the [SRC] button.

During a call

Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode (
Press the Control knob ([38] button).
Switches between Private talk ("PV TALK"/ "PRIVATE")
or Hands-free talk ("HF TALK"/ — ) when pressed.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.

Other functions

Clearing the Disconnection Message
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
You can switch between the Phone Book and the Call
List.
Model-D-1, 2, 4:
Press the [DISP]/ [AUTO]/ [TI] button. (If the [DISP]
button is not provided, press the [AUTO] or [TI]
button.)
Model-D-3:
Press the [AUTO]/ [TI] button.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
2. Select the button you wish to register
3. Exit the dialing method selection mode
)
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
1
* To enter the Menu mode, push the Control knob
towards right or left.
Display
"PHN-SEL"*/
"Phone Selection"*
"PHN-DEL"*/
"Phone Delete"*
"D.MODE"*
"P-STATUS"*/
"Phone Status"*
"ANS"/
"Auto Answer"
"SPK"/
"SP Select"
"C-BP"/
"Call Beep"
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
Model-D-1, 4:
Press the [1] – [6] button for at least 2 seconds.
Model-D-2:
2-1. Press the [FNC] button.
2-2. Select the number to memory by turning the
Control knob.
2-3. Press the Control knob.
Model-D-3:
2-1. Press the [NEXT] button.
2-2. Press the [1] ("1") – [6] ("6") button for at least 2
seconds.
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Press the [MENU] button.
Setting overview
Select a cell-phone subject to hands-free connection.
Refer to page 14.
Cancel registration of the Bluetooth device. Refer to
page 14.
Model-D-4: Select a dialing method. Refer to page 10.
"BT-CON"/ "BAT"/ "SGNL": Display the status of the
1
Bluetooth device. Refer to page 22.
"OFF"/ "0" – "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
Refer to page 22.
"FRT"("Front")/ "F-R"/ "F-L": Specify the voice output
speaker. Refer to page 22.
"ON"/ "OFF": Output a beep from the speaker when a
call comes in. Refer to page 22.
11
|
English