Function Operation; Registering Bluetooth Device; Registering Special Bluetooth Device; Registering Pin Code - Kenwood KCA-BT200 Instruction Manual

Function Operation

Registering Bluetooth device

To make your Bluetooth device (cell-phone or audio
player) usable with this unit, you need to register
it (pairing). You can register up to five Bluetooth
devices to this unit.
When registering from Bluetooth devices
1
Turn on the control unit.

2

Start registering a unit by operating the
Bluetooth device.
By operating the Bluetooth device, register the
hands-free unit or audio player (pairing). Select
"KCA-BT200" from the list of connected units.
3
Enter a PIN code
Model-A, B, C:
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 13).
Model-D, E, F:
Enter "0000" as a PIN code.
Check that registration is complete on the
Bluetooth device.
4
By operating the Bluetooth device, start hands-
free or audio connection.
When registering from this unit (Function of
Model-A/ Model-B/ Model-C)
1
Select the Bluetooth Device registration mode
Select the "Device Regist"/ "DVS REGIST"/ "DVS
REG"/ "DVC REG" display.
2
Press the [38] button (Control knob) for at
least 1 second.
Search for the Bluetooth device.
When search is completed, "Finished" is displayed.
3
Select the Bluetooth Device
Push the Control knob upward or downward to
select the Bluetooth device.
Press the [38] button (Control knob) to
determine the selection.
4
Input the PIN code
Operation type Operation
Select the numbers. Push the Control knob towards up or down.
Move to the next digit. Push the Control knob towards left.
Delete the last digit. Push the Control knob towards right.
5
Transmit the PIN code
Press the Control knob for at least 1 second.
12
|
KCA-BT200
If "Pairing Success"/"PAIRING OK"/"PAIR OK" is
displayed, registration is completed.
6
Return to the device list
Model-A, C:
Press the [38] button (Control knob).
Model-B:
Press the [FNC] button.
7
End device registration
Exit Menu mode.
⁄
• You can also register from the Bluetooth device side. For
the PIN code necessary for registration, see <Registering
PIN Code> (page 12).
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth device>
(page 12).
• For how to operate the Bluetooth device, refer to the
Instruction Manual that comes with your Bluetooth
device.
Function of Model-A/ Model-B/ Model-C

Registering Special Bluetooth device

Allow registration of a special device that cannot be
registered normally (pairing).
1
Select the special device registration mode
Select the "SPCL DVC Select"/"S-DVC SELECT"/
"SDVC SEL" display.
2
Model-A, B:
Press the [38] button (Control knob) for at
least 1 second.
Model-C:
Press the Control knob for at least 1 second.
3
Select a device name
Push the Control knob upward or downward to
select a device name.
Press the [38] button (Control knob) to
determine the selection.
If "Completed"/"Complete" is displayed, registration
of the special device is completed.
4
Go through the procedure of <Registering
Bluetooth device> (page 12) and complete the
registration (pairing).