Table of Contents
Advertisement
General features
Half Screen Graphic Switching
Switching the half screen graphic.
1
Select the half screen graphic
Press the [DISP] button.
Refer to <Display Mode Switching> (page 12).
2
Switch the graphic
Press the [S.A] button.
Each time the button is pressed the half screen graphic switches
as shown below.
Screen Graphic
Graphic 1
Graphic 2
Graphic 3
The half screen graphic cannot be switched in the Standby mode.
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
• A title can't be attached to MD and MP3/WMA media.
• Disc Naming is unavailable when Magazine Random Play is
performed.
2
Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3
Move the cursor to the enter character position
Press the [4] or [¢] button.
4
Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character
"D"
"A"
"N"
"C"
"E"
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• At registration, up to 12 characters can be entered into each
name.
• Memory numbers
- Total number of FM and AM stations: 30 stations
- 50 disc names can be registered in internal CD player and
external CD changer.
• The title of station/CD can be changed by the same operation
used to name it.
• If this unit is removed from the battery, DNPS/SNPS is erased.
— 14 —
Display
"A"
"a"
"
"
*
Button
#Times pressed
[#3]
1
[#2]
1
[#6]
2
[#2]
3
[#3]
2
Advertisement
Table of Contents
