Full Screen Graphic Switching - Kenwood DPX-8030MD Instruction Manual

In MD source
Information
Full screen graphic + Track time
Half screen graphic + Disc title
+ Track time
Half screen graphic + Group title
+ Track time*
Half screen graphic + Track title
+ Track time
Disc title + Track title + Track time
Group title + Track title + Track time*
Full screen graphic
* Selectable only when an MD with group registration is played.
In Auxiliary input source
Information
Full screen graphic + Auxiliary input display
Half screen graphic + Auxiliary input display
Full screen graphic
The display may differ from the above depending on the Auxiliary
input source that has been input into CA-C1AX/ CD changer having
AUX input.
In Standby mode
Information
Full screen graphic + "ALL OFF"
Half screen graphic + "ALL OFF"
Full screen graphic
Display
"P-Time"
"Disc Title"
"Group Title"
"Track Title"
"Disc Title"
"Track Title"
"Group Title"
"Track Title"
Display
"AUX"
Display
"ALL OFF"
"ALL OFF"
— 13 —

Full Screen Graphic Switching

Switching the full screen graphic.
1
Select the full screen graphic
Press the [DISP] button.
Refer to <Display Mode Switching> (page 12).
2
Switch the graphic
Press the [S.A] button.
Each time the button is pressed the full screen graphic switches
as shown below.
Screen Graphic
Spectrum Analyzer Scan
(The items from Movie 1 to Equalizer
Curve are displayed in sequence.)
Movie 1
Movie 2
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
Spectrum Analyzer 5
Spectrum Analyzer 6
Spectrum Analyzer 7
Equalizer Curve
Movies only are switched in the Standby mode.
Display
"Speana Scan"
"Virtual Cruising"
"Deep Marine Movie"
"Peak Hold"
"Plate Falls"
"Square Glass"
"Heart Breeze"
"Crystal Explosion"
"Cipher"
"Megaplant"
"EQ Curve"