Related Manuals for Kenwood DPX-7000DAB
Summary of Contents for Kenwood DPX-7000DAB
-
Page 1: Instruction Manual
DPX-7000DAB DUAL DIN SIZED CD RECEIVER INSTRUCTION MANUAL © 2015 JVC KENWOOD Corporation B5A-0914-00 (XN) -
Page 2: Table Of Contents
CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important BASICS that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. GETTING STARTED 1 Select the display language Warning... -
Page 3: Basics
BASICS Faceplate Remote control (RC-406) Loading slot Display window Remote sensor (Do not expose to bright sunlight.) Lights up when Bluetooth connection is Pull out the established. insulation sheet ( 14) when using for the first time. How to replace the battery Reset button Volume knob Flashes when the unit... -
Page 4: Getting Started
GETTING STARTED Set the clock and date Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob. - Page 5 F/W UP Vxxx For details on how to update the firmware, see: illumination remains as [COLOR SELECT] color. ( 24) www.kenwood.com/cs/ce/ (Refer to the illustration on page 23 for zone identification.) FACTORY RESET YES: Resets the settings to default (except the stored station). ;...
-
Page 6: Digital Radio
DIGITAL RADIO About DAB (Digital Audio Broadcasting) DAB is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.”... - Page 7 DIGITAL RADIO Default: XX Select a service TUNER SETTING Press (LIST UPDATE) to enter Service Search mode. Turn the volume knob or press J / K to select a service, then press AF SET the knob. While listening to DAB: Automatically switch to FM broadcasting the same program if the DAB signal becomes weak.
-
Page 8: Analog Radio
ANALOG RADIO DIGITAL RADIO PTY WATCH 1 Turn the volume knob to select the available Program Type, then press The unit automatically switch from any source to Digital Radio ensembles broadcasting the selected type of program. Program Type: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE,... -
Page 9: Other Settings
ANALOG RADIO Direct Access Tuning (using RC-406) REGIONAL ON: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels. Press DIRECT to enter Direct Access Tuning. Press the number buttons to enter a frequency. AF SET ON: Automatically searches for another station broadcasting the same Press to search for a station. -
Page 10: Aux
Do not leave the cable inside the car when not using. When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of... - Page 11 MODE OFF : Control iPod from this unit. While in ANDROID source, press 5 repeatedly. BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android On the faceplate On the remote control device.
- Page 12 CD / USB / iPod / ANDROID Select a file from a folder/list Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo Press While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the Turn the volume knob to select a folder/list, then press the knob. iPod/iPhone to the USB input terminal of the unit.
-
Page 13: Pandora
Pandora® Preparation: Create and save a new station Install the latest version of the Pandora application on your device (iPhone/ iPod Press touch), then create an account and log in to Pandora. Turn the volume knob to select [NEW STATION], then press •... -
Page 14: Bluetooth
BLUETOOTH® Pandora® BLUETOOTH — Connection Bookmark current song information Press and hold the volume knob. Supported Bluetooth profiles Supported Bluetooth codecs “BOOKMARKED” appears and the information is stored – Hands-Free Profile (HFP) – Sub Band Codec (SBC) to your device. The bookmark is available on your –... - Page 15 – [AUTO PAIRING] is set to [ON]. ( 19) • To disconnect, hold the remote device near to the N-Mark on the unit – KENWOOD MUSIC PLAY application is installed on the Android device again. ( 10) and [BROWSE MODE] is selected ( 11).
- Page 16 BLUETOOTH® BLUETOOTH — Mobile phone On the faceplate On the remote control First incoming call... Answer a call Press or the volume knob Press or one of the number buttons (1 to 6). Reject a call Press Press End a call Press Press While talking on the first incoming call...
- Page 17 BLUETOOTH® Improve the voice quality Make a call While talking on the phone... You can make a call from the call history, phonebook, or Press the volume knob to enter [FUNCTION]. dialing the number. Call by voice is also possible if your Turn the volume knob to select an item (see the following table), then press the mobile phone has the feature.
- Page 18 BLUETOOTH® Make a call using voice recognition PHONE BOOK (Applicable only if the phone supports PBAP) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold to activate the voice recognition of the phonebook contains many contacts). connected phone.
-
Page 19: Bluetooth Settings
BLUETOOTH® Other settings Bluetooth test mode Press the volume knob to enter [FUNCTION]. You can check the connectivity of the supported profile Turn the volume knob to select an item (see the following table), then press between the Bluetooth device and the unit. the knob. - Page 20 BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Listen to Pandora You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA SRC]. ( 5) Open the Pandora application on your device. Connect your Bluetooth audio player via Bluetooth connection.
-
Page 21: Audio Settings
AUDIO SETTINGS While listening to any source... SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. Press AUD to enter [AUDIO CONTROL]. FADER (Not applicable if 3-way crossover is selected.) Turn the volume knob to select an item (see the following table), R15 to F15 (0): Adjusts the rear and front speaker output balance. - Page 22 AUDIO SETTINGS 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and 3-way SPEAKER SIZE crossover. FRONT SIZE 8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10 SPEAKER SIZE Selects according to the connected speaker size for optimum TWEETER SMALL/ MIDDLE/ LARGE/ NONE (not connected) performance.
-
Page 23: Display Settings
DISPLAY SETTINGS AUDIO SETTINGS 3-way crossover setting items SPEAKER SIZE TWEETER SMALL/ MIDDLE/ LARGE MID RANGE 8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6/ 5×7/ 6×8/ 6×9 WOOFER 16CM/ 20CM/ 25CM/ 30CM/ 38CM OVER/ NONE (not connected) X ' OVER TWEETER HPF FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.5KHZ... -
Page 24: Troubleshooting
TROUBLESHOOTING DISPLAY SETTINGS Default: XX Symptom Remedy COLOR SELECT Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. • Adjust the volume to the optimum level. Sound cannot be heard. 1 Select a zone. ( 23) • Check the cords and connections. 2 Select a color for the selected zone. - Page 25 • Depending on the display language you have selected name). unit. ( 27) ( 5), some characters may not be displayed correctly. • Make sure KENWOOD MUSIC PLAY APP is installed on Cannot playback at “NA FILE” Make sure the disc contains supported audio files. ( 27) [BROWSE MODE].
- Page 26 TROUBLESHOOTING Symptom Remedy Symptom Remedy • Reduce the distance between the unit and the Bluetooth “STATION LIMIT” The number of registered stations has reached its limit. Sound is being Retry after deleting unnecessary stations from your device. interrupted or skipped audio player. •...
-
Page 27: References
- iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus • Remove burrs from the center hole and disc edge before inserting a disc. • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. More information •... -
Page 28: Specifications
SPECIFICATIONS REFERENCES Change the display information DAB Frequency Range L Band 1 452.960 MHz — 1 490.624 MHz Each time you press DISP, the display information changes. Band III 174.928 MHz — 239.200 MHz • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. - Page 29 SPECIFICATIONS Version Bluetooth Ver.2.1+EDR / Bluetooth 3.0 Laser Diode GaAIAs Frequency Range 2.402 GHz — 2.480 GHz Digital Filter (D/A) 8 times over sampling Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Spindle Speed 500 rpm — 200 rpm (CLV) Maximum Communication Range Line of sight approx.
-
Page 30: Installation / Connection
INSTALLATION / CONNECTION SPECIFICATIONS Warning Frequency Response (±3 dB) 20 Hz — 20 kHz • The unit can only be used with a 12 V DC power supply, negative ground. Input Maximum Voltage 1 000 mV • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire Input Impedance 30 kΩ... - Page 31 INSTALLATION / CONNECTION Installing the unit (in-dash mounting) Part list for installation Install onto the car brackets using the supplied screws (C) or (D). The screw holes differ depending on the model of the cars. (A) Trim plate (only for Toyota car) Do the required wiring.
-
Page 32: Wiring Connection
If no connections are made, do not let the wire come out from the tab. White/Black For 3-way crossover: Mid range speaker (left) Gray Brown To connect the Kenwood navigation system, To front speaker (right) / Gray/Black (Mute control wire) refer your navigation manual... - Page 33 INSTALLATION / CONNECTION Installing the DAB antenna Determine the antenna installation position Connect the supplied DAB antenna to the DAB antenna jack. ( 32) • The direction of the film antenna (E) changes depending on whether the film antenna (E) is installed on the right side or left side.
- Page 34 INSTALLATION / CONNECTION Caution Clean the windscreen with the supplied Installation overview cleaner (H). When installing the antenna cable inside the front The antenna should be installed on the passenger side pillar with the air bag installed for safety. • The front pillar cover is secured with a special clip which may need to be replaced when it is removed.
- Page 35 INSTALLATION / CONNECTION Rub the film antenna gently onto the Set the postion of the protrusion of the Remove the film covering the earth sheet amplifier unit (F) with the K on the film windscreen in the direction of the arrow and paste the earth sheet on the metal shown to allow it to stick firmly.
- Page 36 • The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.