Table of Contents
Advertisement
Crestron ST-1700C
Operations Guide – DOC. 6225A
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate a wireless RF touchpanel into the system, a gateway device is
required. The C2Net-Device Slot can accept a gateway such as the CNRFGWA.
Once a gateway is configured in a C2Net-Device Slot, the slot allows Cresnet
communication between the touchpanel and the control system.
In Configuration Manager, drag the CNRFGWA gateway from the Wireless
Receivers (RF) folder of the Device Library. The System Views upper pane displays
the CNRFGWA device icon below the PRO2 graphic.
NOTE: An ST-CP control processor is automatically configured with a CNRFGWA
in its STCP-Net Device Slot 3, with a fixed Net ID of 2, when the ST-CP is dragged
into the upper pane of System Views.
Drag the ST-1700C from the Touchpanels (Wireless | Wireless one way) folder of
the Device Library and drop it on the CNRFGWA symbol in System Views. The
PRO2 system tree displays the CNRFGWA gateway in Slot 9, with a default Net ID
of 24. The CNRFGWA displays the touchpanel at the touchpanel's default RF ID
location, "10," as shown in the following illustration.
C2Net Device, Slot 9
Double-click the CNRFGWA icon in the upper pane to open the "Device Settings"
window. This window displays CNRFGWA device information. Select the Net ID
tab to change the gateway Net ID, as shown in the following figure.
1-Way Wireless RF Touchpanel
1-Way Wireless RF Touchpanel: ST-1700C • 13
Advertisement
Table of Contents
