NEC NP-UM330X User Manual page 66

3. Select the network you wish to connect, and click "Select".
The target selection window will be displayed.
4. Place a check mark for projectors to be connected, and then click "Connect".
• When one or more projectors are displayed, from the menu on the projector, select [INFO.] → [WIRELESS LAN]
→ [IP ADDRESS].
When connecting with the projector is established, you can operate the control window to control the projector. (→
page 42)
NOTE:
• When [POWER-SAVING] is selected for [STANDBY MODE] from the menu, the projector that is turned off will not be displayed
in the select window for destination
TIP:
Viewing the "Help" file of Image Express Utility Lite
• Displaying the Help file of Image Express Utility Lite while it is running.
Click the [?] (help) icon on the control window.
The Help screen will be displayed.
• Displaying the Help file of GCT while it is running.
Click "Help" → "Help" on the edit window.
The Help screen will be displayed.
• Displaying the help file using the Start Menu.
Click "Start" → "All programs" or "Programs" → "NEC Projector User Supportware" → "Image Express Utility Lite"
→ "Image Express Utility Lite Help".
The Help screen will be displayed.
56
3. Convenient Features