Turning on the Projector
• Press the
(POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• When the message "Projector is locked! Enter your password."
is displayed, it means that the [SECURITY] feature is turned on.
(→ page 31)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
2. Projecting an Image (Basic Operation)
Standby
Steady orange light
(→ page 126)
16
Blinking
Power On
Blinking blue light
Steady blue light