Exiting The Viewer - NEC NP-UM330X User Manual

Removing the USB memory from the projector
1. Select the VIEWER start screen.
Press the EXIT button with no menu displayed.
2. Remove the USB memory from the projector.
Make sure that the LED on the USB memory is not flashing
before removing the USB memory.
NOTE: If you remove the USB memory from the projector with a slide
displayed, the projector may not operate correctly. If this happens,
turn off the projector and unplug the power cord. Wait 3 minutes, then
connect the power cord, and turn on the projector.

Exiting the Viewer

1. Press the MENU button with the slide screen or the
thumbnail screen displayed.
The control bar or the pop-up menu will be displayed.
2. Press the MENU button again.
The on-screen menu will be displayed.
3. Select a source other than [VIEWER] and press the
ENTER button.
The Viewer will be exited.
TIP: To exit the Viewer using the remote control, select a source other
than [VIEWER].
66
4. Using the Viewer