NEC NP-UM330X User Manual page 124

NOTE:When the cable cover is attached, remove it before inserting the USB
Wireless LAN Unit.
1. Press the POWER button to turn off the projector and set it
into standby condition, and disconnect the power cord.
2. Slowly insert the USB Wireless LAN Unit into the USB (WLAN)
port.
Remove the cap from the USB Wireless LAN Unit, and then insert
it with the surface (side of indicator) facing outward. Keep the cap
for later use.
NOTE: Do not force to insert the USB Wireless LAN Unit.
To remove the USB Wireless LAN Unit, disconnect the power cord
and use the above procedure.
NOTE:
• The green LED on the USB Wireless LAN Unit flashes to show that Wireless
LAN Unit is working. If the USB Wireless LAN Unit is incorrectly attached,
the blue LED will not flash.
• Do not press the button on the USB Wireless LAN Unit. The button will not
work with this model.
6. Installation and Connections
114