Connecting To A Computer - VTech Kidizoom Spin & Learn Camera User Manual

connectIng to a comPuter

You can connect Kidizoom
computer using the included USB cable. Once connected, you can
transfer files between the camera and computer. Please follow the
below steps to make the connection.
• Turn the camera off before connecting to a computer.
• Pull up the rubber cover of the USB port at the bottom of your
camera.
• Insert the USB cable (small end) into the USB port on the camera.
• Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol
• A removable drive called "VTech 1228" will appear. If there is a SD/
SDHC card in the unit, the removable drive will show the content on
the SD card only.
To back up photo or video files taken by the camera:
• Locate and open the "DCIM" folder in the removable drive.
• Your photos or video files will be placed in the subfolders, such as
"100VTECH". Drag and drop the files to a location in your computer
for back up.
To back up voice files recorded by the camera:
• Locate and open the "VOICE" folder in the removable drive.
• Drag and drop the recorded voice files to a location in your computer
for back up.
To transfer photo or video files to the camera:
• Select the photo or video files you would like to upload from your
computer first.
® Spin & Smile Camera TM
to a PC or Mac
.
9