Battery Notice; Sd Card Insertion - VTech Kidizoom Spin & Learn Camera User Manual

Battery notIce

• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision
(if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended are to
be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number
of power supplies.
• Do not use fire to dispose of batteries.

sd card InsertIon

• Make sure the camera is turned off.
• Locate the SD/SDHC card slot at the bottom of the camera.
• Pull up the rubber cover.
• Insert the SD/SDHC card (not included) as illustrated. Once the SD/
SDHC card is detected and can be used, the default memory will set
as SD card memory automatically.
• To remove the SD/SDHC card from the slot, push the card once and
it will eject.
7