Connecting To A Computer - VTech V.Reader User Manual

connecting to a computer

connecting to a computer
• Download the setup program for Learning Lodge Navigator
vtechkids.com/download for US or www.vtechcanada.com/toysdownload for
Canada and install it onto your computer.
• Insert an SD card into your V.reader
• Turn on your V.reader
• Locate the USB port on the upper right-hand side of your V.reader
the rubber port cover.
• Insert the smaller end of the included USB cable into the USB port on your
V.reader
• Insert the larger end of the USB cable into a USB port on your computer. The
USB port is usually marked with the symbol that appears on the USB port cover
of your V.reader
• After connecting to your computer with the USB cable, your V.reader
will show a USB Connected screen (image 8). For help using the Download
Center refer to the Help section of the Learning Lodge Navigator
• Use your free V.Coins to download free e-books from Learning Lodge
Navigator
12
.
®
.
®
. Please refer to images 6 & 7 below.
®
. Enjoy!
TM
Get other manuals https://www.bkmanuals.com
4
, as shown above.
®
6
5
from www.
TM
and open
®
7
®
TM .
8
screen