Battery Status; Automatic Shut-Off; Connecting To A Computer - VTech Kidizoom Camera User Manual

Camera
, and Settings
• To connect to a computer, follow the instructions in the Connecting to
a Computer section below.
• Press the ON/OFF Button

BATTERY STATUS

When the screen shows a Low Battery icon
up all data in the internal memory of Kidizoom Camera™ by uploading
all data to a computer. Once you have saved your data, change the
batteries in Kidizoom Camera™.
When the unit shows the Batteries Exhausted icon
work properly. New batteries should be inserted before further use.
Note: We recommend that you save the data stored in the internal
memory of the Kidizoom Camera™ to a computer regularly to avoid
data loss.

AUTOmATIC SHUT-OFF

To preserve battery life, Kidizoom Camera™ will automatically turn off
after 3 minutes without input. The camera can be turned on again by
pressing the ON/OFF Button

CONNECTING TO A COmPUTER

You can connect Kidizoom Camera™ to a PC or Mac computer using
a standard mini B USB cable (not included). Once connected, you can
transfer files between the camera and computer; please follow below
steps to make the connection.
• Turn Kidizoom Camera™ OFF before connecting to a computer.
• Pull up the rubber cover of the USB port at the bottom of your
camera.
• Insert the USB cable (small end) into the USB port on the camera.
• Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol
• A removable drive called "VTech 1227" will appear.
To back up photo or video files taken by the camera:
• Locate and open the "DCIM" folder in the removable drive.
• Your photos or video files will be placed in the subfolders, such as
"100VTECH". Drag and drop the files to a location in your computer for
back up.
, Movies , Playback
.
.
, Photo Editor
again to turn the unit off.
, we recommend backing
, Games
, the unit will not
.
7