BaTTeRY sTaTUs
The screen shows a Low Battery icon
The unit will not work properly when it shows the Batteries Exhausted
icon
. New batteries should be inserted before further use.
aUTOMaTIC sHUT-OFF
To preserve battery life, Movie Magic DigiCam™ will automatically turn
off after 3 minutes without input. It can be turned on again by pressing
the ON/OFF button
CONNeCTING TO a COMPUTeR
Connect Movie Magic DigiCam™ to a PC or Mac using the included
USB cable. A removable drive called "VTech 1154" will appear.
You can transfer files between the unit and computer. If there is a SD
card in the unit, the removable drive will show the content in SD card
only. If there is no SD card detected, the removable drive will show the
content of the internal memory.
• Turn Movie Magic DigiCam™ OFF before connecting to a computer.
• Pull up the rubber cover of the USB port
camera
• Insert the USB cable (small end) into the USB port on the camera.
• Insert the larger end of the USB cable into a USB port on the computer.
A USB port is usually marked with this symbol
• Download the files/folder from the folder "DCIM" in the drive.
MINIMUM SYSTEM REQUIREMENTS FOR PC/Mac CONNECTION:
Microsoft ® Windows ® XP/ Vista/ Windows ® 7
Mac OS X version 10.5 or 10.6
Note: Once the video camera is connected to your computer, do not
disconnect the video camera and the computer while files are uploading or
downloading. After you have finished, remove Movie Magic DigiCam™
safely by following the steps to safely remove hardware from your
computer. Then you can physically unplug the unit from the computer.
8
.
when the battery level is low.
at the top of your video
.