Removing A Power Supply - Dell PowerEdge C6145 Hardware Owner's Manual

Removing a Power Supply

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
CAUTION: The System requires one power supply to operate normally.
1 Turn off the system, including any attached peripherals, and
disconnect the system from the electrical outlet.
2 Disconnect the power cable from power source and the power supply.
3 Press the release lever and using the handle, slide the power supply out
of the system. See Figure 3-5.
NOTE: Removing the power supply may require considerable force.
Figure 3-5. Removing and Installing a Power Supply
1 handle
3 release lever
2 power supply
Installing System Components | 85