Remote Access Configuration - Dell PowerEdge C6145 Hardware Owner's Manual

Remote Access Configuration

Scroll to this item and press Enter to view the following screen:
Option
Remote Access
(Disabled default)
Serial Port Number
(COM1 default)
Serial Port Mode
(115200 8,n,1 default)
Flow Control
(None default)
Description
Select remote access type.
Select serial port for console redirection.
Make sure the selected port is enabled.
When "Serial Port Number" set to "COM2", the
setting will support SOL.
Select serial port settings.
Select flow control for console redirection.
When setting "Flow Control" to "Software", the
Using the System Setup Program | 61