Dell PowerEdge C6145 Hardware Owner's Manual page 74

Token Setup Option
Non-Coherent HT Link
48A2
Speed
Non-Coherent HT Link
48A4
Speed
Non-Coherent HT Link
48A5
Speed
Non-Coherent HT Link
48A6
Width
Non-Coherent HT Link
48A7
Width
48B9 DRAM Prefetcher
48BA DRAM Prefetcher
48BD Software Prefetcher
48BE Software Prefetcher
5001 PCIE-Slot ASPM
5002 PCIE-Slot ASPM
5003 PCIE-Slot ASPM
5004 PCIE-Slot ASPM
5021 Onboard Lan ASPM
5022 Onboard Lan ASPM
5023 Onboard Lan ASPM
5024 Onboard Lan ASPM
5091 Mezzing Slot ASPM
5092 Mezzing Slot ASPM
5093 Mezzing Slot ASPM
5094 Mezzing Slot ASPM
5097 SATA IDE Combined Mode
5098 SATA IDE Combined Mode
74 | Using the System Setup Program
Description
Set Non-Coherent HT Link Speed to
HT1 1200Mhz.
Set Non-Coherent HT Link Speed to
HT3 2000Mhz.
Set Non-Coherent HT Link Speed to
HT3 2600Mhz.
Set Non-Coherent HT Link Width 8
bits.
Set Non-Coherent HT Link Width 16
bits.
Disable DRAM prefetcher.
Enable DRAM prefetcher.
Disable HW Prefetcher Training on SW.
Enable HW Prefetcher Training on SW.
Disable PCIE-Slot ASPM.
Set PCIE-Slot ASPM to L0.
Set PCIE-Slot ASPM to L1.
Set PCIE-Slot ASPM to L0 & L1.
Disable Onboard NIC ASPM.
Set Onboard NIC ASPM to L0.
Set Onboard NIC ASPM to L1.
Set Onboard NIC ASPM to L0 & L1.
Disable Mezzing Slot ASPM.
Set Mezzing Slot ASPM to L0.
Set Mezzing Slot ASPM to L1.
Set Mezzing Slot ASPM to L0 & L1.
Disable SATA IDE combined mode, if
only AHCI mode is used, the item needs
to be set disabled for port4 & port5.
Enabled, two SATA ports (port 4 & port
5) share one IDE channel.