Installing the 3.5" Hard-Drive Board
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Place the hard-drive board into the sled and connect to the system board.
See Figure 3-16.
2 Replace the eight screws to secure the hard-drive board. See Figure 3-16.
66
Installing System Components
Many repairs may only be done by a certified service technician. You