Removing The 3.5" Hard-Drive Board - Dell PowerEdge C5125 Hardware Owner's Manual

Removing the 3.5" Hard-Drive Board

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the hard-drives. See "Removing 3.5" Hard-Drives" on page 58.
2 Remove the eight screws from the hard-drive board. See Figure 3-16
3 Disconnect the hard-drive board from the system board and lift out of the
sled. See Figure 3-16.
Figure 3-16. Removing and Installing the 3.5" Hard-Drive Board
1 Hard-drive board connector
1
Installing System Components
65