Removing A Sled; Installing A Sled - Dell PowerEdge C5125 Hardware Owner's Manual

Removing a Sled

CAUTION:
immediately replaced with another sled or sled dummy.
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Press the release latch down. See Figure 3-3.
2 Pull the sled out of the system.
Figure 3-3. Removing and Installing a Sled
2
1
1 sled handle

Installing a Sled

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
Push the sled into the system until flush with the case and the release latch
locks. See Figure 3-3.
50
Installing System Components
To ensure proper airflow in the system, if a sled is removed it should be
Many repairs may only be done by a certified service technician. You
Many repairs may only be done by a certified service technician. You
2 sled release latch