Removing Memory Modules - Dell PowerEdge C5125 Hardware Owner's Manual

Removing Memory Modules

WARNING:
has been powered down. Allow time for the memory modules to cool before
handling them. Handle the memory modules by the card edges and avoid touching
the components on the memory module.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the system. See "Removing a Sled" on page 50.
2 Push the locking latches of the DIMM slot outwards. See Figure 3-4.
3 Remove the memory module from the system.
Figure 3-4. Removing and Installing a Memory Module
1
2
3
1 locking latch
3 memory module notch
The memory modules are hot to touch for some time after the system
2 DIMM slot
Installing System Components
51