Package Contents; System Requirements; Hardware Installation - Avermedia Hybrid Super 007 Quick Installation Manual

Package Contents

AVerTV Hybrid Super 007 /
AVerTV Super 007
Infrared sensor cable

System Requirements

System requirements are described in detail on the package box. Before installing the TV tuner card and software, verify that your PC meets
the described requirements.

Hardware Installation

Step 1. Installing the TV Tuner Card
1. Turn off the PC.
2. Remove the cover.
3. Insert the tuner card into an empty PCI expansion slot on the motherboard.
4. Replace the cover back.
Step 2. Making the Connections
Installing Drivers and the TV Software Utility
After the card is installed properly, turn on the computer. The system will automatically detect the new device. Simply skip the wizard, and insert the
accompanying installation CD to install the driver and TV software utility simultaneously.
Installing Drivers and the Application in Windows 2000
The "Found New Hardware Wizard" dialog box will appear. Just click Cancel to skip the Wizard installation procedures.
1.
2. Place the installation CD into the CD-ROM drive.
When the installation main screen appears, choose Install AVerTV.
3.
Click Next to continue the installation process.
4.
Read the license agreement and if you agree to the terms, select "I accept the terms of the license agreement" and then click Next.
5.
Choose Complete to install all the necessary softwares, including AVerTV 6, Acrobat Reader, DirectX 9.0c and Drivers. Then
6.
click Next. For advanced users, it is recommended to choose Custom to select the software you want.
In the "InstallShield Wizard" dialog box, if you are instructed to restart your computer, select Yes. Then click Finish.
7.
Quick Installation Guide
FM radio antenna
Quick Installation Guide
Installation CD Remote Control
Composite Input Adaptor (Optional)
ENG-1