Often-Used Features; Account Codes, Alarm Clock, Timer, & Calendar - Lucent Technologies Merlin Legend 7102 User Manual

Often-Used Features

-Account Codes-
To program:
See Programming Buttons & Settings, p. 20.
In some companies you enter an account code before or during a call to indicate client billing
information. You may be required to enter an account code for all outside calls, or an account code
may be optional for incoming and outgoing calls. Check with your system manager for account code
operation and account codes.
You can program a button for this feature and label it Acct. See also Auto Dial (p. 12) to program an
account code on an outside Auto Dial button.
To enter an account code:
1. Press the button you have programmed,
OR
Press the programmed Feature button and
dial 82.
2. Dial the account code and #.
3. Lift the handset or press the Spkrphone
button to make a call. (If necessary, press an
outside line, Pool, or SA button.)
4. Dial the number (including the dial-out code,
if required).
-Alarm Clock, Timer, &
These features work on display phones only. To set an alarm on a nondisplay phone, see
Reminders, p. 19. When you activate the alarm, your phone beeps every day at the set time
until you cancel the alarm. When an alarm is set, a bell appears on your display to remind you.
The 60-minute timer allows you to track calls, meetings, or other events.
To set the alarm:
1. Press the Set button.
2. Press the Fwd button and press the Set
button again.
3. Press the Fwd or Rev button until the
setting you want appears; press the Set
button again.
4. Press the Fwd or Rev button until the
setting you want appears.
5. Press the Exit button.
To cancel the alarm:
1. Press the Set button.
2. Press the Fwd and Exit buttons.
To enter or change an account code
during a call (the other party cannot hear
your entry), follow Steps 1 and 2. If you
enter an account code for an incoming
call before it arrives, you cannot change
that code during the call.
Calendar-
To set the timer:
1. Press the Time/Timer button.
2. Press the Start button to reset the timer.
3. When finished timing, press the Stop
4. Press the Time/Timer button to return to
To reset the time, day, or date:
1. Press the Set button repeatedly until the
2. Press the Fwd or Rev button to change the
3. Repeat Steps 1 and 2 to reset another item.
4. Press the Exit button.
10
button.
the normal display.
time, day, or date is selected.
item.