Table of Contents
Advertisement
Web Configuration Interface
Telnet Summary
After logging in, the AMX Telnet Summary page (FIG. 31) displays the current information on the
Internet connection. From here, you may go to any particular section for specifics on the connection or
its management.
FIG. 31
Telnet Status page
Telnet Summary
Website Version
Firmware Version
Hardware Version
Ethernet MAC Address
Free Space Remaining
DHCP Address
Static IP
Any changes that are made to interface parameters are saved in persistent storage. Most changes to
interface parameters force the interface to restart, so be careful not to change these parameters while the
interface has other network connections, or these connections will be lost.
30
Shows the current Website version number.
Shows the current version number of the firmware being used in the interface.
Shows the hardware version on which the interface is running.
Shows the interface's Ethernet MAC address. Each interface has a unique
MAC address.
Shows how much free space is remaining in the interface's persistent (flash)
storage.
Shows your current DHCP address. A value of 0.0.0.0 means that a DHCP
address has not been obtained either due to the DHCP server not having
allocated one or DHCP being disabled.
Shows the static IP address that the interface will respond to. A value of 0.0.0.0
means that no Static IP address has been configured. Any other value takes
priority over the DHCP address.
PTE-300 PosiTrack Ethernet Camera Controller
Advertisement
Table of Contents
