Installing The Pte-300 On An Wm-Cam Wall Mount Bracket; Flat Surface - AMX PTE-300 Operation/Reference Manual

Installing the PTE-300 on an WM-CAM Wall Mount Bracket

Flat Surface

1. Mount the PTE-300 to a flat surface by drilling four holes, according to the mounting-plate
dimensions shown in FIG. 18.
Position marker
(on the outer surface)
Ø 3.45"
(87.7 mm)
FIG. 18
Pan Hub (Mounting plate) dimensions (underside of PTE-300 units)
2. Secure the unit to the surface using four 1/4" x 20 machine bolts and lock washers. Ensure that the
external white position marker, on the pan drive hub, is inside the desired camera rotation range.
PTE-300 PosiTrack Ethernet Camera Controller
Camera points this way when the
pan drive is in the center of its
range of motion
(Mechanical home position)
3.00 BHC"
(76.20 mm)
3.45"
(87.7mm)
Installation
13