Table of Contents
Advertisement
Installation
Overview
This PTE-300 enables pan and tilt functionality for mounted camera/lens assemblies and provides lens
control functions for teleconferencing lenses. Software-adjustable stop limits are used on the pan and tilt
drives to limit the range of motion.
Do not mount a PTE-300 in any location where the motion of the camera/lens is
obstructed by any object. Impact or connection with obstructions could damage
internal components.
Mounting the PTE-300
Mount the PTE-300 to a flat horizontal surface, either upright or inverted.
1. Select a surface that can support the combined weight of the PTE-300, the camera/lens, and control
cables and mounting accessories (including the WM-CAM, PM-CAM, and TM-CAM mounts).
2. Locate the external white position markers located on the pan and tilt axis (FIG. 11). The position
markers must align with the pan and tilt axis in order to be considered in the home position.
Central tilt-axis
Pan hub (mounting plate)
FIG. 11
Center position for the camera cradle attachment
PTE-300 PosiTrack Ethernet Camera Controller
Tilt Hub
Position markers, located on the
outer surfaces, mark the center for
the vertical range of camera motion
Camera cradle
mounting holes
Camera points this way
Installation
9
Advertisement
Table of Contents
