Table of Contents
Advertisement
Installation
3. Mount the PTE-300 to a flat surface by drilling four holes, based on the mounting-plate dimensions
shown in FIG. 12. Secure the unit to the surface using four 1/4" x 20 machine bolts and lock
washers.
Position marker
(on the outer surface)
Ø 3.45"
87.7 mm
FIG. 12
Pan Hub (Mounting plate) dimensions
Ensure that the external white position marker, on the pan drive hub, is inside the
desired camera rotation range.
The PTE-300 can be mounted to camera mounts such as the TM-CAM (Tripod Mount Adapter),
WM-CAM (Wall Mounting Bracket), and PM-CAM (Flush/Ceiling PosiTrack Pedestal Mount)..
FIG. 13
PTE-300 cradle support bracket
The camera/lens cradle can be mounted on either side of the cradle support bracket.
10
Camera points this way when the pan drive is in
the center of its range of motion (Home position)
3.00 BHC"
76.20 mm
PTE-300 PosiTrack Ethernet Camera Controller
3.45"
(87.7mm)
Advertisement
Table of Contents
